Table of Contents
The standard dishwasher opening is 24″ wide and 18.5″ high. This standard size has been used for many years, but as people’s kitchen remodeling needs change, the formal dishwasher opening may not be compatible with your layout. Luckily, you can do a few things to make sure you find the right fit for your kitchen!
There are three different kinds: space-saver, regular, and enormous. Some minor variations in width, height, or depth may exist among these models. The dishwasher’s rough opening, on the other hand, can accommodate some minor changes; therefore, if you’re replacing an old dishwasher with a new one, it will most likely fit the area.
Measuring Your Opening
The standard size for most dishwashers is the same as the opening created in most cabinetry. However, there may be variations, such as a cabinet built around a particular model with unusual dimensions. To determine your opening’s width, depth, and height, measure from the inside edge of the hole to the inside edge of the door.
Remove any trim or decorative overlays that may have been included; these are sometimes used to fill up the extra space if the aperture is too big or the dishwasher is too small, and they can be removed as needed.
With adjustable feet, most undercounter dishwashers are approximately 24 inches wide, 24 inches deep, and 35 inches tall. This implies that your cabinets’ rough opening must be a minimum of 24 by 24 by 35 inches.
The dishwasher’s dimensions are around 23.5 inches wide, 23.5 inches deep, and 34 inches high. Some wiggle room is required to place and connect the dishwasher; a slightly loose fit is preferable to a tight one. If your rough opening is shorter than this measurement, consider getting a space-saver dishwasher with decorative trim to conceal the sides.
Space-saver dishwashers are designed to work in small kitchens, apartment kitchens and renovate existing kitchen space with a dishwasher for the first time. They have the same depth and height criteria as a regular-sized dishwasher (24 inches deep by 35 inches tall), but they are usually about 18 (or 17 5/8) inches wide.
They can fit into any hole at least 18 inches wide, so they may be stowed anywhere a 20-inch or 22-inch dishwasher used to be. They can also frequently be accommodated in a series of cabinets after they have been put in place.
Oversized dishwashers are a relatively new invention. They’re used in big kitchens, modern kitchens, and large family kitchens. They need the same 24-inch depth and 35-inch height opening as a regular dishwasher, but they take up considerably more space.
The most frequent dishwasher size is 30 inches, although they are available in sizes up to 42 inches. However, an oversized dishwasher must be chosen at the time of cabinet installation to accommodate the extra breadth in the design.
How big is a standard dishwasher opening?
A standard dishwasher opening is large enough to hold place settings and most medium pots and pans. Entrances are generally 24 inches wide, 34-36 inches high, and 24 inches deep, matching standard dishwasher dimensions.
What are standard dishwasher dimensions?
The typical size is 24 inches wide, 24 inches deep, and 35 inches high.
What is the rough opening for an 18 dishwasher?
Although they are the same size and depth as a standard dishwasher (24 inches deep by 35 inches high), their dimensions vary somewhat. They generally measure around 18 (or 17 5/8) inches wide.
Are all standard dishwashers the same size?
Dishwasher sizes are typically conventional. These standard dimensions are based on the cabinet opening size rather than the actual dishwasher capacity. Even if your present cabinet opening fits, you should allow for variations in height, width, and depth in your area.
What is the rough opening for a 24 dishwasher?
In a perfect world, the precise opening size of a dishwasher is 24 inches wide by 24 inches deep. Height: 34 inches. In other words, it would take up no more room than your current oven or gas cooktop.
Is there a 22-inch dishwasher?
The minimum dishwasher size is 18 inches wide by 22 long. There are three different sizes available, based on width: 18, 22, and 24 inches. The typical dishwasher is 24 inches wide, although the 18-inch and 22-inch versions often save space in smaller kitchens such as flats or shared work/living areas.
How much clearance do you need behind a dishwasher?
Most undercounter dishwashers are approximately 24 inches wide, 24 inches deep, and 35 inches high. With a range of feet, they measure roughly 24 by 24 inches in width, depth, and height.
How do I know if my dishwasher will fit?
You can measure the depth from the rear wall to the front of your cabinets to see how deep your dishwasher will fit within them. Keep in mind any projecting handles (mainly bar handles), as they should extend beyond the front of your cabinets while narrowing down your dishwasher purchase.
Do dishwashers need air gaps?
Creating air gaps is the most efficient approach to keep your drain from cross-contaminating your dishwasher with waste. You’ll need an air gap if you want to prevent your dishwasher from flooding with dirty water. In many areas, plumbing codes require dishwasher air gaps as well.
How much does a plumber charge to install a dishwasher?
The cost of installation had increased since May of 2013 when we investigated essential dishwasher solutions. The minimum labor charge for a full-sized dishwasher is $190.
Depending on the model and brand, installation costs can range from $70 to $500 or more. Replacement dishwashers have lower installation costs than first-time installations.