Bosch Dishwasher Error Code E24 Problem Solved!

The drain hose is clogged, resulting in the Bosch dishwasher error code E24. Cleaning the obstructions or straightening the hose is a typical solution to fix the problem. E24 is a code that indicates an issue with the water drain on any Bosch dishwasher.

What does the company have to say about it? According to Bosch, E24 occurs when there is a blockage in the drain hose or bent incorrectly. So all you have to do now is clean out your drains and straighten them properly.

However, user reviews dispute this fact. According to users of Bosch dishwashers, E24 did not occur as a result of clogging.

Bosch Dishwasher Error E24

The instructions say that the E24 error is caused when there isn’t enough water to fill up the wash impeller.

But it’s hard not having any faith, given our experience!

We’re in an upright position, so the hose can’t bend on its own. Most individuals report this happening at around 2 minutes into the wash cycle – right after switching on but before getting started with dishes.

(users discover they are waiting for something that will never arrive).

So while I can see how someone might blame their dishwasher if faced with such issues.

Drain Pump

Here’s what we think is causing the E24 error, as well as some of the elements that may be involved:

  • The drain pump has failed.
  • The fault may be with any one of the sensors. You must discover which sensor is faulty.
  • A faulty software program on the control unit.

How to Remove a Dishwasher Clog in Five Easy Steps

It’s not a significant problem to clean the drain pump, either. You just need to do it daily.

It is straightforward to remove the filter that is positioned at the bottom of the dishwasher.

Clean the drain hose using a rope brush. You may also remove the plastic plug, which you might find beneath the filter, allowing access to the drain pump’s cogwheel.

Look at it and see whether there are any scraps or debris from previous meals left inside.

Here are a few simple methods:

  • If the pump does not operate, examine it for any problems with the rotors or rotating impellers and other components. These parts might require some lubrication.
  • Turn on the device and wait for 1-2 minutes. Open the door for 30 seconds when you hear the sound of filling.
  • What you have to do is prepare for the precise moment. If you succeed, E24 may be avoided. Then you can close the door and resume your job. Many individuals have avoided the error by doing so, which has given many people a sense that it isn’t always a complex problem. It’s also possible that a faulty door lock caused it.
  • Some consumers report that the machine works just fine, but you can’t possibly run your dishwasher this way every day. It might have worked for some people, but it isn’t always the case. According to Bosch, many people are skeptical that this may be the ideal answer to the E24 error code because the drain system is not broken; instead, it’s due to a problem with the drain system.
  • It’s entirely conceivable that the dishwasher pump gets blocked, causing the drain water to stop. The E24 error code appears on display. Maybe a thread or a hair got caught in the impeller. You’ll have to take it out as well.

How to fix bosch dishwasher error code E24 in detail

Detail Fixation

Here’s a step-by-step tutorial on how to repair this problem. The following are some useful suggestions:

  1. The first thing to check is the drain system. It’s one of the most prevalent causes. Make sure that the valves are in place and that the filters aren’t clogged.
  2. The check valve is positioned directly beneath the drain. It’s usually white in color. If things appear to be in working order, it’s time to inspect the drain hose. Make sure there aren’t any obstructions or tangles in it.
  3. The drain pump then takes over. Is there a humming noise when you push the cancel button? If no sound is heard, check the drain pump’s power. Perhaps it’s because of a lack of juice that the E24 error is appearing. The power of the drain pump is 120 volts.
  4. If the drain system is in excellent working order and you are still getting the error code E24, there may be more than a clog. To do this, remove the dishwasher from its cabinet.
  5. After you’ve tried everything else and still can’t get the dishwasher out of the cabinet, it’s in, goes to the control on the lower right side. Remove both seals from the right panel.
  6. After you’ve verified that the washer is actually off, check to make sure the breaker for the dishwasher isn’t on. If it is, there may be a more severe problem.
  7. Now there are six wires in view. Three grey ones and three black ones. Take away the connector from both of them. The 89 Ohms on the grey wire that goes straight to the drain pump should be noted. 14 Ohms, across the black cables, go to the circulation pump. If everything looks good, replace the main control board.
  8. When you notice a plastic container within, there are tubes at the bottom. These tubes might be clogged with debris. Their structure is quite similar to that of a siphon. They have a propensity to accumulate trash.
  9. If you can remove branch pipes without causing any trouble, be sure to clean up after yourself.

Most Common Problems of Bosch Dishwasher & Solution of E22