Table of Contents
The E15 error code on the Bosch dishwasher informs a user that their leakage protection has worked. Unfortunately, this means water got into one of two places: either through an open seal or by forcing its way past seals elsewhere in the machine tray area (a plastic lining).
If activated, the anti-flood switch kicks off-pump service to get rid of any unwanted intruders before they can cause significant damage–and if all else fails, there’s always diverting your attention away from reading this article while it cleans up after itself!
The reasons for the water flow can be the following:
- The leak sensor is broken.
- The drainage system (filter, hose, sewage) gets clogged.
- Nozzles are blocked or have insufficient pressurization.
- There is a problem with the water sprinkler system.
The manufacturer of the Bosch technology doesn’t provide much information about the E15 error code, and it’s advised to contact a professional.
This condition has the same meaning on most dishwashers, such as (silence plus 44 dba, slimline, Classixx, Serie 4, exxcel, super silence, lifestyle automatic, logixx)
How to fix bosch dishwasher error code e15
People who have made such a blunder want you to do the following: The kitchen equipment must be disconnected from the electrical network and tilted at a 45-degree angle.
Make sure to dry out the anti-flood switch in your dishwasher. If you notice that there’s still water present after one day of drying, it could be due to a more severe fault correction, so don’t try and fix an error without knowing what caused this first!
Scrutinize your dishwasher to discover the source of water seepage. Ensure it’s in good working order and that there aren’t any visible flaws causing a problem with leaks!
When a dishwasher’s tank bursts, it is pretty rare for a leak to occur. This might happen if the machine has been in operation for an extended period or a manufacturing issue.
The occurrence of the e15 error in Bosch dishwashers indicates that the leak sensor or sprinkler has failed. If the sensor is broken, it may operate even when there is no water in the tray. Unfortunately, it also does not turn on when a break occurs occasionally.
As a result, it is essential to replace it. The sensor is placed in a plastic cup at the bottom of the gadget.
The pressure of the water supplied to the tank machine may cause the plastic sprinkler to fracture. As a consequence, the water goes into the pan and subsequently activates the protection.
When the E15 error code appears on a Bosch dishwasher, search for the source of the water leaking into the tray. It’s possible that one of the hoses has burst or that connections between components have been lost. Stop using the dishwasher until you’ve found out why it’s leaking.