Table of Contents
Hey there, dishwasher warrior! Have you got a “kitchenaid dishwasher clean light blinking” situation? So, your trusty dishwasher’s “Clean” light is flashing like a disco ball, and you’re scratching your head, wondering what’s up. Well, don’t throw in the towel just yet. Let’s roll up our sleeves and dive into what might be causing this hiccup.
|Clean light blinking
|Overfill protection float stuck
|Press down to release
|Water supply off
|Ensure water supply is on
|Suds in the dishwasher
|Use vegetable oil; run cycle without dishes
|Control board glitch
|Reset control board
|Water temperature issue
|Run hot water; select new wash cycle
|Persistent blinking after reset
|Deeper technical issue
|Contact KitchenAid for professional service
Why is My Dishwasher’s Clean Light Flashing?
Ah, the age-old question. It’s like asking why the chicken crossed the road, but a tad more technical. Here’s the lowdown:
1. Float On: Check the overfill protection float. Can it bob up and down like dancing to its favorite tune? Give it a gentle press to set it free if it’s stuck.
2. Waterworks: After installing your dishwasher, it’s easy to forget to turn the water supply back on. Double-check to make sure it’s flowing.
3. Sudsy Affair: Peek inside. Do you see foam partying at the bottom? Suds can play spoilsport and mess with the dishwasher’s sensing system, preventing it from filling with water.
- You are using the wrong detergent. It’s like putting salt in your coffee instead of sugar. Yikes!
- Missing rinse aid dispenser cap. It’s like leaving home without your keys.
- I was overloaded with dishwasher detergent. Remember, sometimes less is more.
If you’re dealing with a sudsy situation:
- Scoop out those pesky suds with a plastic cup.
- Empty the dishwasher, and pour 2-3 tablespoons of vegetable oil to calm the foam frenzy.
- Run a cycle without any detergent or dishes. Think of it as giving your dishwasher a spa day.
- Follow up with a full cycle, armed with detergent but sans dishes.
4. Power Play: Sometimes, your dishwasher just needs a minute to itself. Unplug it or switch off the breaker for a minute. It’s like a mini-vacation for your appliance.
KitchenAid Dishwasher Specifics
KitchenAid dishwashers are like the Swiss Army knives of the appliance world. They’re packed with features! But if the “Clean” light blinks faster than you can say “dirty dishes,” it might hint at a water temperature issue.
- Control Freak: Reset the control board by pressing “High Temp Wash” and “Heated Dry” in a quick sequence, ending with “High Temp Wash.”
- Wait it Out: Patience is a virtue. Wait for the control panel lights to stay solid, then hit “Cancel/Drain.”
- Hot Stuff: Run the hot water tap in your kitchen until it feels like a summer’s day. Turn it off, choose a wash cycle, and press “Start.”
- Call in the Pros: If that pesky “Clean” light still acts like a strobe, it’s time to ring up KitchenAid. It might be hinting at a deeper issue.
Q: Is it normal for the Clean light to stay on after the cycle?
A: Absolutely! It’s just your dishwasher saying, “Job well done!” Once you open the door post-cycle, the light will bid farewell.
Q: What if the reset trick doesn’t work for my KitchenAid dishwasher?
A: If the light’s still flashing its SOS signal, it’s best to contact KitchenAid. There might be a deeper issue at play.
Q: Can I use any detergent for my dishwasher?
A: Nope! Using the wrong detergent is like fitting a square peg in a round hole. Stick to dishwasher-specific detergents.
Still in a pickle? Don’t sweat it. Reach out for professional help or schedule a service. After all, every cloud has a silver lining, and soon your dishes will be sparkling again!