Table of Contents
If your Kenmore washer is not working properly, a simple reset may solve the problem. Whether your washer is stuck, showing an error code, or not responding, learning how to reset Kenmore washer can save you time and money. This guide will walk you through different reset methods for Kenmore top-load and front-load washers.
When Should You Reset Your Kenmore Washer?
Resetting your washer can help fix common problems, such as:
✅ Washer not starting
✅ Error codes appearing on display
✅ Washer stuck on a cycle
✅ Unresponsive control panel
✅ Spin cycle not working
If your washer has any of these issues, try the reset methods below before calling a technician.
How to Reset Kenmore Washer (General Reset Method)
Most Kenmore washers can be reset using a simple power cycle. Follow these steps:
1️⃣ Unplug the Washer: Disconnect the washer from the power outlet.
2️⃣ Wait for 5 Minutes: This allows the washer’s internal memory to reset.
3️⃣ Plug It Back In: Reconnect the power cord to the outlet.
4️⃣ Open and Close the Lid: If you have a top-load washer, open and close the lid 6 times within 12 seconds.
5️⃣ Start a Test Cycle: Select a wash cycle and press Start to check if the reset worked.
If your washer is still not working, try the model-specific reset methods below.
How to Reset a Kenmore Front-Load Washer
If you have a Kenmore front-load washer, follow these steps to reset it:
1️⃣ Unplug the Washer: Wait 5-10 minutes to let the control panel reset.
2️⃣ Press and Hold “Start” and “Pause/Cancel”: Hold both buttons for 5 seconds.
3️⃣ Plug the Washer Back In: Reconnect the power cord.
4️⃣ Select a Wash Cycle: Press the Start button to see if the washer is working normally.
How to Reset a Kenmore Top-Load Washer
For Kenmore top-load washers, follow this method:
1️⃣ Unplug the Washer: Wait for 5 minutes to reset the control board.
2️⃣ Lift and Lower the Lid: Open and close the washer lid 6 times within 12 seconds.
3️⃣ Reconnect Power: Plug the washer back in.
4️⃣ Run a Test Cycle: Select a cycle and press Start to see if the issue is fixed.
If the washer is still not working, check for error codes on the display panel.
How to Reset Kenmore Washer After Power Outage
If your washer stopped working after a power outage, follow these steps:
1️⃣ Unplug the Washer for 10 Minutes: This clears any power-related errors.
2️⃣ Press and Hold the “Start” Button: Hold it for 5-10 seconds before plugging the washer back in.
3️⃣ Run a Rinse and Spin Cycle: This helps reset the washer’s internal settings.
If your washer is still not responding, check your home’s power supply and breaker box.
How to Reset Kenmore Washer Error Codes
Kenmore washers sometimes display error codes when something is wrong. If you see an error code, try this reset method:
1️⃣ Turn Off the Washer: Press the Power button.
2️⃣ Press and Hold “Stop” or “Pause/Cancel”: Hold for 5 seconds to clear the error code.
3️⃣ Unplug the Washer: Wait 5 minutes before plugging it back in.
4️⃣ Check the Washer’s Door or Lid: If it’s not closed properly, the washer won’t start.
5️⃣ Restart the Cycle: Select a wash cycle and press Start to see if the error is gone.
If the error code persists, refer to the Kenmore washer manual for specific troubleshooting steps.
Additional Troubleshooting Tips
🔹 Check the Power Supply: Make sure your washer is plugged in properly and the circuit breaker is not tripped.
🔹 Inspect the Water Supply: If your washer won’t start, check that the water valves are open.
🔹 Balance the Load: An unbalanced load can prevent the washer from spinning.
🔹 Clean the Drain Pump: A clogged drain pump can cause error codes and cycle issues.
Conclusion
Now you know how to reset Kenmore washer using different methods for both top-load and front-load washers. Resetting your washer can fix many common problems, saving you the hassle of repairs. If the reset doesn’t work, check for error codes or possible mechanical issues.
If your Kenmore washer still isn’t working, it may be time to call a professional for further inspection. We hope this guide helps you get your washer running smoothly again!
